|
Raven inline amps are capable of
amplifying both L1 and L2 frequencies and will
improve performance on receivers with cable
lengths of over 50 ft. They're available with
SMA, TNC, BNC, or N connectors and no special
wiring is required, making installation a
breeze. The amplifier is compatible with all
dual frequency GPS receivers due to its wide
operating voltage range, 3 to 28 VDC, and low
power consumption, 8mA. Raven amplifiers are
made with gold plated brass with rugged and
watertight packaging. Just plug the amplifier
directly in line with your antenna cable. Power
to the inline amplifier is already available
from your GPS receiver, the inline amplifier
uses the same power as the antenna so no extra
wiring is required.
As with all Raven products, our inline
amplifiers come with a full one-year parts and
labor warranty.

Inline Amplifiers with TNC connectors are 3.770” in length. Length will vary slightly with “N” and “SMA”
connectors installed.
-
Power consumption 8mA.
-
Typical Noise figure for L1 Inline Amplifiers is < 3 dB.
-
Typical Noise figure for L1/L2 Inline Amplifiers is < 4 dB.
-
Input voltage for all models is from 3 to 28 VDC. Current draw is < 10 ma or 4-28VDC.
-
Operating temperature is -55oC (-67oF) to 45oC (113oF)
Please use the chart below to determine which amplifier best suits your needs.
| Model |
Gain |
Cable Distance |
Connectors |
| LA-12-1575-100N |
12 +/- 1dB |
50ft (15.26m) |
N type |
| LA-12-1575-100N |
12 +/- 1dB |
50 ft (15.26m) |
N type female both ends |
| LA-12-1575-100S |
12 +/- 1dB |
50 ft (15.26m) |
SMA type female both ends |
| LA-12-1575-100T |
12 +/- 1dB |
50 ft (15.26m) |
TNC type female both ends |
| LA-12-1575-100NS |
12 +/- 1dB |
50 ft (15.26m) |
N one side, SMA the other |
| LA-12-1575-100NT |
12 +/- 1dB |
50 ft (15.26m) |
N one side, TNC the other |
| LA-12-1575-100ST |
12 +/- 1dB |
50 ft (15.26m) |
SMA one side, TNC the other |
| LA-21-1575-100N |
20 +/- 2dB |
100 ft (30.48m) |
N type female both ends |
| |
| LA-21-1575-100S |
20 +/- 2dB |
100 ft (30.48m) |
SMA type female both ends |
| LA-21-1575-100T |
20 +/- 2dB |
100 ft (30.48m) |
TNC type female both ends |
| LA-21-1575-100NS |
20 +/- 2dB |
100 ft (30.48m) |
N one side, SMA the other |
| LA-21-1575-100NT |
20 +/- 2dB |
100 ft (30.48m) |
N one side, TNC the other |
| LA-21-1575-100ST |
20 +/- 2dB |
100 ft (30.48m) |
SMA one side, TNC the other |
| |
| LA-12-L1/L2N |
12 +/- 1dB |
50 ft (15.26m) |
N type, female |
| LA-12-L1/L2S |
12 +/- 1dB |
50 ft (15.26m) |
SMA type, female |
| LA-12-L1/L2B |
12 +/- 1dB |
50 ft (15.26m) |
BNC type, female |
| LA-12-L1/L2T |
12 +/- 1dB |
50 ft (15.26m) |
TNC type, female |
| LA-12-L1/L2TMF |
12 +/- 1dB |
50 ft (15.26m) |
|
| |
| LA-21-L1/L2N |
20 +/- 2dB |
100 ft (30.48m) |
N type, female |
| LA-21-L1/L2S |
20 +/- 2dB |
100 ft (30.48m) |
SMA type, female |
| LA-21-L1/L2B |
20 +/- 2dB |
100 ft (30.48m) |
BNC type, female |
| LA-21-L1/L2T |
20 +/- 2dB |
100 ft (30.48m) |
TNC type, female |
| |